We have worked with Powerbox from the beginning, sold more products than any other UK dealer. If you want to do it right contact M&R and speak to Dave
Need to use extra servos on a big or fast model? Running extra long servo leads? Need the security of two batteries? Want two batteries and a fail-safe switch?
Powerbox units feature powerful servo amplifiers and screening from interference. Dual circuits throughout- no corner cutting. The Switch only units allow Li-Po cells (built in regulators) to be used for long flying sessions-more flights/mAh than Ni cells.
Powerbox units, Sensor Switch, Gemini Switch and all PB units give 5.9v which is perfect for all servos including JR Servos. Only unregulated 5N cell packs should not be used on JR servos as fully charged these are over 7.0v.
Powerbox also have their own user forum Click here
,
Categories
- Labour Charges
- PowerBox-Systems
- Special Offers
- Adhesives
- Festo Connectors
- Jet Engines->
- Jet Turbine Accessories->
- Landing Gear & Accessories->
- Parts Saito Four Stroke->
- Props->
- Radio Equipment & Servo Arms->
- Accessories-All types->
- Batteries->
- Building Materials
- Exhausts->
- Engines (Petrol/Glow)->
- Engine Parts/Spares
- Jet Aircraft->
- Spinners
- Chargers / Checkers
- Connectors & Leads
- Fuel Tanks & Acc
- Light Systems for models
- Tools & Accessories->
- CARF-Models.com
- Electric Aircraft / Kits->
- Electric Aircraft Spares->
- Glow/Petrol Models->
- Helicopters->
- Helicopter Spares->
- Helis, Spares & Acc->
- Electric Motors and EDF->
- Electric Speed Controllers (ESC)
- Aerobatic Kits
- Gift Ideas
- Gliders->
- Oils and Fluids
- Screws, Bolts and Fixings
- Secraft RC Accessories->
- Transport Bags
- Magazines
- Model Flying Clubs Local area
- Clothing
- Gift Vouchers
- Special Orders
PowerBox-Systems
Product Image
Item Name-
Powerbox Core PBR-7S
PBR-7S This is a seven-channel receiver with a single receiver circuit. The unit features a P²-BUS interface for servo and telemetry data, and an...
Powerbox Core PBR-9D
PBR-9D This is a nine-channel receiver with two redundant receiver circuits. The unit features a P²-BUS interface for servo and telemetry data,...
Powerbox Core radios
The new Powerbox radio is out and ready! If you would like accurate information on the radio please call Dave 01923 270405
Powerbox Core Receiver range/options
Please contact us for advice on your requirements. The range available covers all needs. The receiver units Four different receivers are available to...
PowerBox Gemini II with magnet
To order around 1 week delivery PowerBox Gemini II The Gemini II is the logical development of the PowerBox Gemini, which we have produced unchanged...
Powerbox iGyro 1e
Powerbox iGyro1e As with the iGyro 3e, the impressive feature of the iGyro 1e is just how easy it is to use. The device can be used immediately after...
PowerBox iGyro 3Xtra
Extremely accurate triple-axis MEMS sensor New regulatory algorithm for fixed-wing model aircraft with improved performance Optional GPS-controlled...
Powerbox iGyro GPS III unit
The new GPS III is the result of a continuing program of development of the GPS II, which has now been on the market for a good eight years. The...
Powerbox Leads-specials and soldering service
We have many special and one off Powerbox leads and offer a soldering service to adapt and extend/shorten leads. Call 01923 270405 or email for...
Powerbox Source
Features High performance Optimised cooling Small size Optional OLED screen, 128 x 64 pixels Four different output voltages Suitable for use with all...
Powerbox Unit Sensor Switch Mount
Raise mount for aluminium Sensor switch Mercury SR2/Competition SR2 etc (Switch not included)
Powerbox V3 Sensor Switch Unit Mount
Raised mount for V3 regulated Sensor Switch Easy wire routing through mounting plate
PowerPak 2.5 X 2 Pro 7.4v Nominal
Features Integral charge / security electronics (PRO version) Can be charged using mains PSU or 12 V adapter (PRO version) Integral voltage monitor...
PowerPak 2.5 x 3 Pro
Battery type LiIon Capacity 2500mAh Nominal voltage 11.1V Final charge voltage 12.6V Charge voltage 10V - 17V Weight 191g Weight, mounting frame 8g...
PowerPak 5.0 x 2 Pro
Battery type LiIon Capacity 5000mAh Nominal voltage 7.4V Final charge voltage 8.4V Charge voltage 10V - 17V input Weight 235g Weight, mounting frame...
Screen for PowerBox Royal SRS and Champion SRS
Replacement screen for PowerBox Royal SRS and Champion SRS Includes lead and mounting screws
Spark RS. Unregulated 6601
The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V...
Spark RS. Unregulated 6601
The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V...
|
Copyright Motors and Rotors