PowerBox-Systems

We have worked with Powerbox from the beginning, sold more products than any other UK dealer. If you want to do it right contact M&R and speak to Dave Need to use extra servos on a big or fast model? Running extra long servo leads? Need the security of two batteries? Want two batteries and a fail-safe switch?

Powerbox units feature powerful servo amplifiers and screening from interference. Dual circuits throughout- no corner cutting. The Switch only units allow Li-Po cells (built in regulators) to be used for long flying sessions-more flights/mAh than Ni cells.

Powerbox units, Sensor Switch, Gemini Switch and all PB units give 5.9v which is perfect for all servos including JR Servos. Only unregulated 5N cell packs should not be used on JR servos as fully charged these are over 7.0v.

Powerbox also have their own user forum Click here
Product Image Item Name-
Powerbox Leads

Powerbox Leads

The PowerBox PIK range of connectors exploits modern Hot-Melt technology to combine proven connector systems used in modelling applications. All the...
Powerbox Leads-specials and soldering service

Powerbox Leads-specials and soldering service

We have many special and one off Powerbox leads and offer a soldering service to adapt and extend/shorten leads. Call 01923 270405 or email for...
Powerbox Source

Powerbox Source

Features High performance Optimised cooling Small size Optional OLED screen, 128 x 64 pixels Four different output voltages Suitable for use with all...
Powerbox sports Cap

Powerbox sports Cap

Powerbox sports cap
Powerbox Vario PBS Vario 6625

Powerbox Vario PBS Vario 6625

PowerBox Systems Available from mid May. Pre order now The PBS-Vario is an extremely precise climb rate and altitude sensor for use with the PowerBox...
Powerbox XT-60-MPX adapter lead 100mm 1277/10

Powerbox XT-60-MPX adapter lead 100mm 1277/10

Adapter lead XT-60 battery to MPX (Powerbox device/ECU etc) 100mm long (4") 2.5 mm² multicore wire with silicon insulation.
PowerPak 2.5 X 2 Pro 7.4v Nominal

PowerPak 2.5 X 2 Pro 7.4v Nominal

Features Integral charge / security electronics (PRO version) Can be charged using mains PSU or 12 V adapter (PRO version) Integral voltage monitor...
PowerPak 2.5 x 3 Pro

PowerPak 2.5 x 3 Pro

Battery type LiIon Capacity 2500mAh Nominal voltage 11.1V Final charge voltage 12.6V Charge voltage 10V - 17V Weight 191g Weight, mounting frame 8g...
PowerPak 2.5X2 ECO

PowerPak 2.5X2 ECO

The ECO version is fitted with an integral fully-featured balancer circuit and a charge socket. PowerPak ECO batteries can be charged using any...
PowerPak 5.0 x 2 Pro

PowerPak 5.0 x 2 Pro

Battery type LiIon Capacity 5000mAh Nominal voltage 7.4V Final charge voltage 8.4V Charge voltage 10V - 17V input Weight 235g Weight, mounting frame...
Pre made Extension leads with PB wire 25cm pk of (2)

Pre made Extension leads with PB wire 25cm pk of (2)

Features 0.35mm² cross section HD 30% weight saving only 11g/m fire resistant robust isolation Plugs and sockets mate perfectly Transparent...
Pre made Extension Leads with PB wire 75cm pk of (2)

Pre made Extension Leads with PB wire 75cm pk of (2)

Features 0.35mm² cross section HD 30% weight saving only 11g/m fire resistant robust isolation Plugs and sockets mate perfectly Transparent...
Screen for PowerBox Royal SRS and Champion SRS

Screen for PowerBox Royal SRS and Champion SRS

Replacement screen for PowerBox Royal SRS and Champion SRS
Smart Switch (No regulator) HV set ups

Smart Switch (No regulator) HV set ups

Technical Data Operating voltage 4.0V - 9.0V Power supply 2S LiPo/LiIon, 2S LiFePo, 4S or 5S NiCd/NiMH Maximum load current 10A Output voltage non...
Smoke Oil

Smoke Oil

Powerbox smoke oil. Collection only Pre order.
Spark Switch Pro 5.9-12v Ignitons

Spark Switch Pro 5.9-12v Ignitons

Ignition cannot cause interference Galvanic separation between ignition and receiver Immune to static discharge from ignition Regulated or...
Temperature probe for SparkSwitch Pro and PBS-T250

Temperature probe for SparkSwitch Pro and PBS-T250

Temperature probe up to 250°C for the SparkSwitch Pro and PBS-T250.
Battlife Guard 2s (7.4v)

Battlife Guard 2s (7.4v)

The Battlife Guard has been developed specifically for use with 2S and 3S Li-Ion and LiPo batteries. This little unit is very simple to use, and can...
Battlife Guard 3s (11.1v)

Battlife Guard 3s (11.1v)

The Battlife Guard has been developed specifically for use with 2S and 3S Li-Ion and LiPo batteries. This little unit is very simple to use, and can...
MPX Mounting flange (Female end-small) (pkt 6)

MPX Mounting flange (Female end-small) (pkt 6)

In stock NEW: Mounting frame for MPX female connectors The PowerBox MPX mounting frames are a new design, and accurately accommodate all M6 and MPX...
New MPX Mounting flanges (pkt 6)

New MPX Mounting flanges (pkt 6)

In stock NEW: Mounting frame for MPX male connectors The PowerBox MPX mounting frames are a new design, and accurately accommodate all M6 and MPX...
Copyright Motors and Rotors