0  items  - £0.00

Powerbox Competition SRS

Our Price: £304.98


Product Description:

Powerbox Competition SRS

Features:

SRS - Serial Receiver System provides the ability to use receivers with a serial interface, such as those made by Spektrum DSM2 and DSMX, Multiplex M-LINK, Futaba S-BUS and Jeti R_SAT.
Unrestricted channel assignment of the PowerBox outputs
Integral high-resolution graphic OLED screen with 128 x 64 pixels
Particularly user-friendly menu-based programming using the SensorSwitch
Signal amplification and interference suppression for 14 channels and 18 servos
Synchronised servo output for totally synchronous servo response
Flight recorder: records Lost Frames and Fail-Safe periods for all receivers connected to the backer
Variable frame rate, range 12 ms - 21 ms
16-bit processor for fast, high-resolution signal processing
Four match-channels, each for two servos. Accurate adjustment of all eight servos
Double regulated output voltage for receivers and servos
Can be connected to Spektrum and Multiplex MSB downlink channel bus systems
Direct transmission of battery voltages and capacities to the transmitter
Separate voltage and capacity displays for each battery
Software-selectable servo voltage: 5.9 V or 7.4 V
Minimum value memory displays any voltage collapses
Large-area heat-sinks for high regulator power
Regulator monitor, regulator malfunction indicator
Support for three battery types: LiPo, NiMH / NiCd, LiFePo
Suppresses any servo feedback currents which might develop

Specification:

Operating voltage: 4,0 Volts to 9,0 Volts
Power source:
2 x two-cell LiPO batteries 7,4 Volts
2 x five-cell NiCd or. NiMH batteries
2 x two-cell LiFePo batteries (A123)
Current drain:
switched on - approx. 125 mA
switched off - approx. 33 uA
Dropout voltage: approx. 0.25 V
Max. receiver and servo current:
2 x 10 A (stabilised) according to cooling , Peak 2 x 20 A
Servo signal resolution: 0.5 us
Signal repeat rate:
12 ms, 15 ms, 18 ms, 21 ms (frame rate)
Screen: OLED 128 x 64 pixels, graphic
Servo sockets: 18Sockets, 14 channel
Temperature range: - 30C to + 75C
Weight: 115 g
SensorSwitch: 15 g
EMV approval: EN 55014-1:2006
CE approval: 2004/108/EG
WEEE Reg. No.: DE 639 766 11

This battery backer fulfils the EMV protective requirements, EN 55014-1:2006 with certificate dated 10 February 2011. EMC approval 2004/108/EG.



© Copyright Motors & Rotors

Bookmark and Share