Special Offers

Product Image Item Name-
11 x 8 Grey 1316.28.20

11 x 8 Grey 1316.28.20

11 x 8 Grey (good stock levels)
22 x 10 Carbon

22 x 10 Carbon

PT 22 x 10 Carbon prop Only one in stock!
CARF 4 servo rudder mount frame

CARF 4 servo rudder mount frame

CARF inline four servo mounting tray allows 4 servos to be ganged together Takes 4 x std servos One only available
Cermark Spitfire 20-26cc) Cowl

Cermark Spitfire 20-26cc) Cowl

Replacement cowl for Cermark Spitfire kit with dummy exhausts (Cowl only original part)
Chroma Wizard GPS Flight Controller BLH8645

Chroma Wizard GPS Flight Controller BLH8645

The pocket-sized Chroma Wizard condenses all your flight and gimbal controls into a small, lightweight unit that works like a TV remote. It also...
Dream-Flight Libelle Tail group spares

Dream-Flight Libelle Tail group spares

One only spare tail group for the excellent Dream-Flight LLC Libelle glider Vertical and Horizontal tail
Eurokit RCA/15490/000 Retract frame

Eurokit RCA/15490/000 Retract frame

Eurokit RCA/15490/000 Retract frame
FMS F-16 EDF 6s 3300-3900

FMS F-16 EDF 6s 3300-3900

Spec Check: Wingspan: 813mm Overall Length: 1258mm Flying Weight: 2090g Motor Size: 2860-KV1850 Inner runner ESC: Predator 70A Servo: 9g digital...
Graupner AT-6 Cowl 6206.7

Graupner AT-6 Cowl 6206.7

Graupner AT-6 Radial Glass Cowl for 6206 i/c AT-6 in red.
Graupner Extra 300L Cowling 6282.7

Graupner Extra 300L Cowling 6282.7

Graupner Extra 300L Leki 1600mm Glass Fibre Cowl 6282.7 Same cowl fits the Matrix from BlackHorse
Graupner Grey 10 x 6" 1316.25.15

Graupner Grey 10 x 6" 1316.25.15

Graupner Grey 10" x 6"
Graupner Marine Ultra 3500-6M 28v 6361

Graupner Marine Ultra 3500-6M 28v 6361

Graupner water cooled neodym motor 20-30V Case 100 x 70mm weight 760g 1 only
Graupner MVVS/Evo/Graupner 58cc Header pipe 1905.52

Graupner MVVS/Evo/Graupner 58cc Header pipe 1905.52

Graupner MVVS/Evo/Graupner 58cc Header pipe 1905.52
Graupner SB6

Graupner SB6

Graupner SB6 40Mhz
Graupner SMC19

Graupner SMC19

Graupner SMC19
Graupner Speed 500 Race E 7306

Graupner Speed 500 Race E 7306

3.8-8.4v range 36mm dia, 50mm case length. Shaft length 12mm Shaft dia 3.17mm 189g weight Nominal voltage 7.2v max RPM 22500 Good stock
Hacker A50-12L 8 Pole Turbine

Hacker A50-12L 8 Pole Turbine

Hacker A50-12L 8 Pole Turbine 1 only left in stock!
HATORI 4C-91 Tuned Pipe #9920-1

HATORI 4C-91 Tuned Pipe #9920-1

HATORI 4C-91 Tuned Pipe #9920-1
Hatori SB17/18/20 Replacement Header

Hatori SB17/18/20 Replacement Header

Hatori SB17/18/20 Replacement Header - For OS Engines 955 This is the replacement header for the Hatori SB18/20. This will bolt on to the OS 91...
MAH 69cm blades. Double taper blades

MAH 69cm blades. Double taper blades

MAH 69cm blades. Double taper blades. Choice of Carbon/White and Kevlar/White finish.
Copyright Motors and Rotors